Home › Gateways › 192.168.1.2

192.168.1.2 Admin Login & Setup Guide

Direct Answer: How to Access 192.168.1.2

192.168.1.2 is the standard fallback IP address assigned to secondary routers operating in Access Point (AP) mode or Wi-Fi range extenders connected to a primary 192.168.1.1 network. To log in, open your browser and navigate directly to http://192.168.1.2. Default credentials typically use username admin and password admin / password.

Open 192.168.1.2 in Browser

Hardware Brands Associated with 192.168.1.2

The 192.168.1.2 private subnet is most frequently deployed by Secondary Routers, Access Points, and Wi-Fi Extenders.

Default Gateway IP Primary Manufacturers Default Username Default Password
192.168.1.2 Secondary Routers, Access Points, and Wi-Fi Extenders admin admin / password

Manufacturer Setup Instructions & Special Nuances

When you turn an old router into an Access Point, you must disable its internal DHCP server and assign it a static IP outside the main DHCP pool (conventionally 192.168.1.2) to prevent two DHCP servers from clashing on the same network.

Step-by-Step Login Instructions

  1. Connect to Local Network: Connect your device via Wi-Fi or with an Ethernet cable to LAN port 1-4.
  2. Open Web Browser: Launch Chrome, Safari, Firefox, or Edge.
  3. Navigate to Gateway: Type http://192.168.1.2 into the address bar and press Enter.
  4. Submit Credentials: Type the username and password from the table above or the physical sticker on your hardware.
  5. Secure Router: Update the default administrative credentials and Wi-Fi security keys immediately.

192.168.1.2 Frequently Asked Questions